Product List

Edge banding machine

Functional features

Edge banding machine function: gluing and welting → front and back flush → rough trimming → finishing → tracking trimming → scraping edge → polishing
1. Gluing and edge sealing: The cylinder controls the switch of the glue door (WSN cylinder and Yiri solenoid valve), with stable glue quantity and uniform thickness.
2. Front and rear: cut off the excess edge banding at both ends of the sheet (WSM cylinder with 2 pressure regulating valves and 1 pressure relief valve), the air pressure is more stable, and the head and tail are more stable.
3. Rough repair: The six-blade alloy flat knife trims off the extra side strips.
4. Intensive repair: The six-edged R knife trims off the excess edge banding to form a rounded corner, which makes the trim more beautiful.
5. Profiling tracking: The four corners after edge banding are trimmed into small arcs to be more smooth and not irritating. The self-designed tracking action and gas path design make the profiling chamfering more stable.
6. Edge scraping: Super hard alloy R knife scrapes the fine lines of the edge banding strip to make it smooth.
7. Polishing: The cloth wheel quickly polishes and polishes the edge of the edge banding strip, making it smoother and more beautiful.

Parameters

PLC	delta
Frequency converter	Yatai
Low-voltage electrical appliances	LS Korea
Temperature table	Autonics Korea
Limit switch	Kaikun, South Korea
Pneumatic Components	Yiri, WSN
Gear reducer	Shengbang
High-speed motor	UFC
Rail	Kate Precision

Previous:No more
Next:No more