What causes the dislocation of CNC cutting machine?

1. A certain part of CNC cutting machine is loose or has problems, such as impurities on the outside, rails, screw rods without cleaning and oiling for a long time, etc., they will also show dislocation.
2. Does the wire connecting the drag chain on the CNC cutting machine beam to the machine control box have poor contact or voltage problems: CNC CNC router requires a large amount of power during operation. If the voltage is too low, the power supply to the drive is insufficient and the power cannot reach A misalignment phenomenon will be formed. This situation is usually the y-axis misalignment. This phenomenon may be caused by the external voltage is not working, or someone on the same line may use high-power equipment such as electric welding.
3. Problems with the CNC cutting machine drive: The layout of the drive itself or the original electronic equipment will cause misalignment. This is the most common reason; if the number of times is not displayed and the speed is reduced a little, it can sometimes be carved normally. The drive is not completely broken; if it is misplaced at the beginning, it means the drive is completely broken. Solution: repair the drive or replace the drive.
Anna Solution Technology Co., Ltd. is committed to customized panel furniture production line. The main products are: CNC cutting machine, Side hole machine, Edge banding machine, laminating machine and other panel furniture production line equipment, which are widely used in panel furniture, custom cabinet wardrobes, CNC machining areas such as solid wood furniture.