Daily inspection and maintenance of CNC cutting machine

The CNC cutting machine can check and clean up the following three aspects of the CNC cutting machine, and the maintenance and maintenance of the CNC cutting machine can also find out the problems and solve them in time.
1. Inspection and cleaning of supporting computers
1). Check and kill regularly, but be careful not to turn on the anti-virus level during work to cause interference.
2) Clean the chassis dust regularly, pay attention to the heat dissipation of the chassis, and be careful of excessive dust causing errors in the industrial control card.
3) Regularly defragment disks and optimize computer systems.
2. Inspection and cleaning of mechanical parts
1). Clean the industrial control box regularly.
2). Clean the lead screw regularly to prevent foreign matter from sticking to the lead screw. The lead screw is very important in the equipment. It determines the accuracy of the machine, and the lead screw also plays an important role in the transmission process.
3). The table should be cleaned up in time after the engraving work is completed, which provides convenience for the CNC router to work next time.
4) Clean up the material scraps beside Rail and Rail to prevent the machine from jamming during the working process due to the interference of the scraps.
3. Treatment of oil and waste oil
The maintenance and maintenance of the CNC cutting machine should add lubricating oil in time. After adding the lubricating oil, move slowly back and forth. The CAD drawing ensures that the lubricating oil can be evenly added to the Rail and the lead screw. Clean up the oil, waste oil and material scraps on the screw.